- http://www.exp-tech.de/adafruit-analog-output-k-type-thermocouple-amplifier-ad8495-breakout
- https://www.adafruit.com/datasheets/AD8494_8495_8496_8497.pdf
How to connetct
Solder Pin Headers to the RADDS AUX ADC Port and connect the ThermoCouple 3.3V, ADC and GND pins
Repetier Firmware Settings
When using the Repetier Online Configuration Tool, you have to edit the value in:
- Temperature sensor
- Temperature sensor pin
Use the values used in the image