RADDS compatible LCD display from sparklab
- 128×64 pixels
- very compact design
- modular design with separate boards
- easy installation on RADDS Extension Port
- stable communication protocol, cable length about 2m possible
Connecting to the RADDS AUX1 port
Before you can connect the sparkLCD you have to solder some pin headers to the RADDS AUX1, then connect the two ribbon cables
Connecting to the RADDS LCD port using the sparkLCD adapter
Connected to RADDS LCD port
sparkLCD adapter (this is not included in the normal sparkLCD kit)
When using this alternative, the RADDS AUX1 port remains free, and can be used for the RADDS Extension board, bluetooth, WiFi..
Firmware settings (Repetier 0.92.8)
If you alter firmware settings by editing the configuration.h file,you have to select controller like this:
FEATURE_CONTROLLER = 19 // for sparkLCD
FEATURE CONTROLLER = 23 // for sparkLCD + Adapter on RADDS LCD port
When using the Repetier Online Configuration Tool:
Select sparkLCD or sparkLCD + Adapter on RADDS LCD Port (depends on what LCD kit you have)
Included in the kit
- sparkLCD display module
- Encoder board with mounting hardware (nuts, washers)
- Knob for Encoder
- Ribbon cable 8pol.
- Ribbon cables 4pin.